Disc-Type Centrifugal Oil Purifier for Gasoline, Diesel and Marine Heavy Fuel Oil

Basic Info

Model NO.	FCF-8000 centrifugal oil separator
Treatment Capacity	1200 ~ 8000 Lph
Heater Power	30 ~ 120kw or Above, as Per Request
Heater Temperature	40 ~ 70 Degree C
Working Pressure	Less Than 0.3 MPa
Drum Rotating Speed	6200 ~ 9000 Rpm or as Per Request
Designed for Filtering	Fuel Oil, Light Oil, Diesel Oil, Turbine Oil, etc.
Used Oil Viscosity	2 ~ 220 mm2/S
Power Supply	380V, 50Hz, 3pH or as Per Request
Delivery Time	25 Days
After-Sales Services Provided	Online Support, Field Installation and Training
Certificate	CE, ISO, CCC, SGS
Warranty Period	1 Year
Sludge Discharge Modes	Automatic or Manual
Water Content (After Purification)	Less Than 50ppm
Transport Package	in Standard Exportation Plywood Case
Specification	1750 x1350 x1930mm
Trademark	FUOOTECH
Origin	Chongqing, China
HS Code	8421299090
Production Capacity	5000 Sets/Year

Product Description

FUOOTECH Series FCF Centrifugal Oil Purifier Centrifuging Oil Water SeparatorBrief Introduction: Series FCF Centrifugal Oil Purifier is designed for the Purification, concentration, clarification of mineral oils such as fuel oil, light oil, diesel oil, lubricating oil, turbine oil, hydraulic and work shop oils, vegetable oil, etc.Series FCF is mainly used to remove water, particles and mechanical impurities from diesel oil, lubricating oil and other mineral oil so as to reduce wear of the diesel engine and other machines, and prolong engine life. Features:

1. High effective Filtration System. Adopting progressive filtering tech, the best precision can be upto 0.5 micron, which can remove more than 99.99% of impurities from the oil.
   
2. High density heater system, which can speed up water removal by increasing oil temperature that can help water molecule get away from oil molecule more quickly after get heating. But over-heating may damage the oil's quality, FUOOTECH choose the high density heater system to solve this matter, making the heating load less than 1.5W/cm2, stable temperature controller controls the oil heating temperature automatically, safe and reliable.
   
3. With famous brands of Electrical components and protection system for over-voltage, over-current, over-load, phases lacking, etc., any problems happen, the whole machine stops automatically.
4. Advanced protection for blockage on oil inlet point where vacuum transmitter is installed, if it's blocked, machine will stop automatically.
   
5. PLC system is installed, making the whole operation fully automatically, and PLC display screen shows all the operation status and any problem .
6. Able to be equipped with Heat recovery device as optional.
7. Low maintenance time and cost.
   

Technical Specification:

Model		Unit	FCF-10	FCF-20	FCF-30	FCF-40	FCF-60	FCF-80	FCF-100
Capacity		L/hr	1000	2000	3000	4000	6000	8000	100000
Separating-factor		a/g	8000	8400	8800	9400	10000	10600	11200
Running speed		r/min	8300
Particles		μ	3
Water content		ppm	≤100
Pressure		MPa	≤0.2
Temperature		ºC	10-80
Cleanness			NAS 6 grade
Power Supply			380V, 50HZ, 3PH (Customerized)
Sludge-discharge			Automatic
Motor Power		kW	4	6	8	8	12	16	20
Heater Power		kW	24	27	30	35	45	55	65
Total Power		kW	28	33	38	43	57	71	85
Weight		Kgs	480	650	850	900	1000	1100	1200
Dimension	L	mm	1000	1000	1100	1200	1300	1350	1400
	W	mm	700	750	800	900	950	1000	1100
	H	mm	1000	1100	1100	1200	1250	1300	1350